You could also use padlocks to keep "off limit" equipment from being used, but make sure the locks you use can’t be mistaken as lockout locks. Tagout devices, where used, shall be affixed. This method gives employees an instruction, and to be most effective you should inform your workers that this is how you’re going to identify equipment that isn’t supposed to be used. Lockout devices, where used, shall be affixed in a manner that will hold the energy in a safe or off position. This isn’t the same as following a tagout procedure – the tag is on the controls and not the energy isolating devices, and the tag doesn’t include a tagout warning statement. HEALT & SAFETY IN THE OIL & GAS INDUSTRY Alex TX Gi 2017 lockout 503 John Newquist Lockout Tagout by Snohomish County Atlantic Training, LLC. You could attach a tag such as "Do not use without authorization" or something similar onto the machine’s controls to show that you don’t want employees to operate that machine. Lock Out - Tag Out - Try Out Safety Course 2014 H&K Equipment Group Energy Control Program by MCIEAST Atlantic Training, LLC.
Dismantle it so that it isn’t hooked up to any energy anymore and it’s completely unable to be operated. To keep out-of-service machinery from being used, you might consider physically disconnecting it from its energy supplies. The lockout/tagout standard says that you can’t use lockout/tagout equipment for any other purpose, so if you aren’t actually doing repairs or servicing work on this equipment, you shouldn’t use lock out/tag out equipment on it. The lockout/tagout standard doesn’t apply when you "decommission" equipment or put machines "out of service." The main concern is probably that someone would try to start a machine that you don’t want to run anymore, for whatever reasons.
0 kommentar(er)
